Leaded Solder Wire And Solder Bar

Product Details:

The Sn63Pb37 no-clean tin lead solder wire and solder bar can be applied in the high-precision electronic products as well as the other manufactured goods which call for precise soldering work. It can be also used for the soldering of common electronic products. Moreover, our product is ideal for use in the automotive and electronics industries. It is dedicated for the manual soldering of printed circuit boards and some others.

The Sn-37Pb is the most common type of tin-lead alloy solder, which features the maximum dosage and the maximum demand. Sn63Pb37 represents that the alloy of solder contains the 63% tin content and the 37% lead content. Its diameter ranges from 0.35mm to 3.0mm. With the melting point of 183 degrees Celsius and the working temperature of 205 degrees Celsius, this Sn63Pb37 no-clean tin lead solder wire and solder bar can offer quite stable welding performance.

When applied in the wave soldering ovens, the common solder bar can often produce a large amount of solder splash or unmelted solder. At present, the Sn63Pb37 solder wire manufactured by our company can be categorized into the conventional reel packing type and the rubber hose packing type. Each piece of tin wire packed with rubber hose is 12.5g weight, and each carton can accommodate 100 pieces.

So far, our Sn63Pb37 no-clean tin lead solder wire and solder bar has been exported to United States, Russia, Germany, India, and Brazil, among other countries. We are also looking for agents on a global scale.

Product Features:

• Favorable Fatigue Resistance and Outstanding Soldering Performance
• Ultra High Electrical Conductivity
• Mid-Temperature Soldering
  The manufactured product belongs to the mid-temperature solder, which is characterized by nice softness, and wonderful wetting property.
• Benefits from Activated Rosin Flux The solder bar is doped with an appropriate amount of activated rosin flux, thus providing distinguished soldering effect, fast soldering speed, as well as extremely good fluidness.
• Ultra Strong Oxidation Resistance
  Due to the addition of anti-oxidant element, our Sn63Pb37 no-clean tin lead solder wire and solder bar can give strong resistance to oxidation. The mid-temperature solder is difficult to be softened, and its anti-oxidant capacity is greatly enhanced.

Technical Parameters:

Product Details:

The Sn45Pb55 tin lead solder wire and solder bar features the melting point of approximately 215 degrees Celsius and the working temperature of 250 degrees Celsius. Its alloy is composed of the 45% tin content and the 55% lead content. For achieving a terrific soldering effect, this product needs to be doped with an appropriate amount of solder flux while being used. During the melting process, a wave solder oven is required to be used. When the liquidus temperature is reached, the liquid tin can be directly poured on the printed circuit board.

This product is often found in the electrolytic tinning, wave soldering, and dip soldering machines. Its diameter ranges from 0.35mm to 3.0mm. The solder wire adopts the activated solder as the rosin flux, which is formed by adoption of high technology.

Our Sn45Pb55 tin lead solder wire and solder bar has been sold to South Africa, Paraguay,Mexico, Russia, and Lithuania, among other countries. We are also looking for more agents on a global scale. Please don’t hesitate to contact us, if you are interested in our product.

Scope of Application:

• The Sn45Pb55 tin lead solder wire and solder bar can be used in the automotive and electronics industries. It is fit for the manual soldering work, component installation, surface mount technology, as well as the repair welding process. Simultaneously, it is applicable for the spot welding of PCB components.

Remarkable Features:

• Rapid Melting, Superior Wetting Property and Superb Expandability: There is no-clean activated rosin flux inside the solder wire, which features rapid melting, superior wetting property, and superb expandability. Therefore, our product is provided with outstanding soldering performance.
• Superior Electrical Conductivity: Our product does not cause any splatter, undesirable odor, or core breakage. The solder joint is filled, shiny, firm and reliable.
• Others: In addition, the Sn45Pb55 tin lead solder wire and solder bar is provided with superb weldability, nice fluidity, as well as low viscosity after being melted. It is perfect for the wave soldering process.

Product Details:

Our Sn30Pb70 tin lead solder wire and solder bar pertains to a kind of high-temperature leaded solder wire with its melting temperature of 225 degrees Celsius and the operating temperature of 280 degrees Celsius. Its alloy is composed of the 30% tin content and the 70% lead content, and its diameter ranges from 0.35mm to 3.0mm.

This series of rosin-cored solder wire adopts the newest type of activated rosin flux, which is produced in use of the most advanced automated equipment. Then, it can be adapted to the complexity and high precision of the development of the electronics industry.

The Sn30Pb70 tin lead solder wire and solder bar is provided with uniform surface, extremely high purity, superb fluidity, wonderful wetting property, and a rare occurrence of oxidizing slag. It is fit for the manual welding process which has high demand.

Furthermore, this product is highly resistant to oxidation. It can provide the mirror-like surface, short wetting time, and relatively high expansion rate at below 300 degrees Celsius. Its solder joint is glossy and nice, which allows our product to be desirable for the spot welding of PCB parts.

Characteristics:

• With no-clean activated rosin flux, the solder wire possesses high melting speed, as well as outstanding wettability and expandability. Thus, it can offer distinguished soldering effect.
• Beyond that, our Sn30Pb70 tin lead solder wire and solder bar is provided with superior electrical conductivity. It does not produce any odor, splatter or core breakage. Its solder joint is full, firm and highly reliable.
• The leaded solder wire manufactured possesses high melting point.

Chemical Components:

Product Details:

Application:

• The Sn25Pb75 tin lead solder wire and solder bar can be applied in the thermal fuse, power semiconductor, calculators, and other electrical products. This type of solder wire is ideal for the soldering of stainless steel, zinc alloy, aluminum lamp caps, and some others. It is also used in the fans, electric wires, and the automotive printed circuit boards within the automotive and electronics industries. Moreover, our product can be suited for the spot welding of PCB components.

Chemical Components:

Product Details:

Our Sn50Pb50 tin lead solid solder wire and solder bar possesses the melting point of approximately 200 degrees Celsius and the working temperature of 250 degrees Celsius. Sn50Pb50 means that the alloy of soldering wire consists of the 50% tin content and the 50% lead content. The diameter of our product varies from 0.35mm to 3.0mm. Formulated by utilizing high technology, the activated flux is used as the rosin flux in tin wire.

Our company is a Chinese manufacturer, which basically researches and produces the lead-free solder wire, solder bar and solder paste, as well as the flux materials for soldering printed circuit boards. We own over a decade of manufacturing experience. At present, we hold the most advanced production equipment and test instruments within this industry. Our company has passed the ISO9002 quality system certification, and our products can offer stable performance. For better meeting the requirements for diversified soldering processes, the solder made by our factory can be divided into various shapes, including the strip, wire, block, plate, ball, and more.

Applications:

• The Sn50Pb50 tin lead solid solder wire and solder bar can be used for the soldering of stainless steel, zinc alloy, aluminum lamp cap, and some others in the automotive and electronics industries. This type of product is particularly suitable for the manual welding work, component installation, surface mount technology, as well as the repair welding process.

Characteristics:

• Fast Melting Speed, Superb Wettability and Terrific Expandability: The tin wire is added with the no-clean activated rosin flux, featuring fast melting speed, superb wettability and terrific expandability. Thereby, it can offer distinguished soldering effect.
• Wonderful Electrical Conductivity, No Core Breakage, and No Splash
• High Melting Point: This Sn50Pb50 tin lead solid solder wire is formed by tin and lead. The leaded tin wire manufactured is characterized by high melting point, superb softness and nice wetting property.
• Satisfactory Solder Joint and Favorable Fluidity
  Our solder joints are filled, bright and firm. Both RMA and RA cores are made in compliance with the IPC J-STD-006 and JIS Z 3283 Class AA/ Class A standards. All these solder fluxes can be dissolved in solvent, featuring very little smoke and very few splatters.
• Flux Content: The flux content ranges from 1.2% to 3.5%. For the vast majority of applications, the flux content is recommended to range from 1.8% to 2.0%. The wire diameter is optional, including 0.35, 0.4, 0.5, 0.6, 0.8, 1.0, 1.2, and 1.6mm.

Product Details:

Our Sn40Pb60 tin lead solder wire and solder bar possesses the melting point of about 200 degrees Celsius. Its soldering performance is stable. Our company combines many years of practical experience in the production of solder bars with the latest technology. We also introduce the direct-reading spectrometer from Germany to monitor the product quality, and select high-purity tin alloy as the raw material.

All metallic elements that may seriously affect the wave solder bar are rigorously controlled at different stages from the raw-material melting, mixing, inspection, perfusion, and some others. These elements comprise cadmium, aluminum, gold, iron, nickel, and more. Furthermore, this Sn40Pb60 tin lead solder wire and solder bar is effectively doped with a sufficient amount of antioxidant, thus providing stable quality, strong light resistance, and very little solder splash.

Uses:

• Our Sn40Pb60 tin lead solder wire and solder bar is not only applicable for electrical products, but also used in stainless steel goods, automotive printed circuit boards, fans, and electric wire. This type of product is especially suitable for the manual soldering, component installation, surface mount technology, and the repair welding process. At the same time, it is ideal for the spot welding of PCB parts.

Features:

• The wire diameter is over 0.35mm.
• The melting speed is ultra high. Both wettability and expandability are extremely good.
• Additionally, our product has outstanding electrical conductivity. It does not cause any odor, splash, or core breakage.
• Beyond that, the solder joints are filled, shiny, firm and trustworthy. The fluidity of the solder is favorable.

Technical Parameters:

Product Details:

The Sn35Pb65 tin lead solder wire and solder bar can offer pretty stable welding performance. Its alloy comprises the 35% tin content and the 65% lead content. The wire diameter ranges from 0.35mm to 3.0mm. The activated rosin flux in solder wire is formed by adoption of high technology. This kind of wire belongs to the high-temperature lead tin wire with its melting point of approximately 220 degrees Celsius and the working temperature of 250 degrees Celsius.

Our product puts to use the high-purity metal. It is subjected to the vacuum deoxidation process under the rigorous quality control, which can effectively control the degree of oxidation, as well as the content of both metals and nonmetals.

The Sn35Pb65 tin lead solder wire and solder bar features smooth surface, extremely high purity, nice fluidity, terrific wetting property, as well as the very little oxidizing slag. It is ideal for the manual soldering process which has high demand. At the soldering temperature of over 300 degrees Celsius, the anti-oxidant solder bar can fast consolidate the solder joint, and also provide short wetting time. Its expansion rate is higher than that of the common solder. Owing to strong oxidation resistance, the solder joint is shiny and gorgeous. Thus, our product is also suitable for the spot welding of PCB components.

Depending on our sincere attitude and professional technology, we can provide our customers with the related technical solutions. If clients have any problem about the use of our Sn35Pb65 tin lead solder wire and solder bar, they can consult us at any time. We will try our best to help our customers. Furthermore, we have a team to support the complete pre-sales, in-sales and after-sales service activities.

Product Details:

Our Sn60Pb40 water-soluble tin lead solder wire and solder bar is a common product in high demand. With the melting point of 189 degrees Celsius, it offers pretty stable soldering performance. Sn60Pb40 means that the alloy of solder wire and solder bar comprises the 60% tin content and the 40% lead content. The diameter of this product varies from 0.35mm to 3.0mm. Its melting point is 189 degrees Celsius, and the operating temperature is 230 degrees Celsius.

Our company has passed the ISO certification. Our raw materials are purchased from Yunnan Province.Moreover, this product is manufactured by adoption of high-purity tin and electrolytic lead, thus featuring reliable quality and the tiny deviation of tin content.

Applications:

• The Sn60Pb40 water-soluble tin lead solder wire and solder bar can be applied in the automotive and electronics industries. It is desirable for the welding of common electronic products. Additionally, it is especially suitable for the hand soldering process, component installation, surface mount technology, as well as the repair welding process.

Characteristics:

• Thanks to high purity solder and fast melting speed, our Sn60Pb40 water-soluble tin lead solder wire and solder bar can offer high soldering speed. Due to superb flux formulations, it gives very little rosin splatters and ultra clean solder joints. The solder joint is firm, sufficient and bright.
• Furthermore, our product is pretty economical. It can produce the maximum quantity of firm solder joints, by depending on the lowest consumption rate of solder. The energy consumption is relatively low.
• In addition, our product features superior electrical conductivity. It does not cause any core breakage, splash or undesirable odor.
• Other prominent characteristics include fast soldering speed, favorable soldering effect, superb wetting property, as well as nice fluidity.

Product Details:

Remarkable Features

• Great Fatigue Resistance and Nice Soldering Performance
  There is no-clean activated rosin flux inside the solder wire. Our product is provided with superior soldering effect, due to its high melting speed, favorable wetting property, and extraordinary expansibility.
• Distinguished Electrical Conductivity and No Core Breakage
• High Melting Point
  The solder wire is composed of tin and lead. The leaded solder wire manufactured is characterized by high melting point, satisfactory softness, superb wetting property, bright surface, fast soldering speed, and no residue

Scope of Application
Our Sn63Pb37 reel tin lead solder wire and solder bar is perfect for all manual soldering processes, component installation, as well as the solder-joint repair technology. The flux in solder wire is uniformly distributed, and there are very few flux residues. Meanwhile, our product is proper for the dip soldering process.

Product Details:

The Sn63Pb37 is the most common type of tin-lead alloy solder, which features the maximum dosage and the maximum demand. Sn63Pb37 represents that the alloy of solder contains the 63% tin content and the 37% lead content. Its diameter ranges from 0.35mm to 3.0mm. With the melting point of 183 degrees Celsius and the working temperature of 205 degrees Celsius, this Sn63Pb37 no-clean tin lead solder wire and solder bar can offer quite stable welding performance.

Additional Information:

• Item Code: Sn63Pb37
• Production Capacity: 1000
• Delivery Time: 2-5 days
• Packaging Details: in reel or tube

Product Details:

Characteristics

• Thanks to high purity solder and fast melting speed, our Sn60Pb40 tin lead solder wire and solder bar can offer high soldering speed. Due to superb flux formulations, it gives very little rosin splatters and ultra clean solder joints. The solder joint is firm, sufficient and bright.
• Furthermore, our product is pretty economical. It can produce the maximum quantity of firm solder joints, by depending on the lowest consumption rate of solder. The energy consumption is relatively low.
• In addition, our product features superior electrical conductivity. It does not cause any core breakage, splash or undesirable odor.
• Other prominent characteristics include fast soldering speed, favorable soldering effect, superb wetting property, as well as nice fluidity.

Related Names
Precision Soldering Wire | Eutectic Solder Wire | Lead Based Solder Materials

Additional Information:

• Item Code: 6040
• Production Capacity: 2000
• Delivery Time: 3
• Packaging Details: reel

Product Details:

50% tin content and the 50% lead content. The diameter of our product varies from 0.35mm to 3.0mm. Formulated by utilizing high technology, the activated flux is used as the rosin flux in tin wire

Characteristics

• Fast Melting Speed, Superb Wettability and Terrific Expandability
  The tin wire is added with the no-clean activated rosin flux, featuring fast melting speed, superb wettability and terrific expandability. Thereby, it can offer distinguished soldering effect.
• Wonderful Electrical Conductivity, No Core Breakage, and No Splash
• High Melting Point
  This Sn50Pb50 tin lead solid solder wire is formed by tin and lead. The leaded tin wire manufactured is characterized by high melting point, superb softness and nice wetting property.
• Satisfactory Solder Joint and Favorable Fluidity
  Our solder joints are filled, bright and firm. Both RMA and RA cores are made in compliance with the IPC J-STD-006 and JIS Z 3283 Class AA/ Class A standards. All these solder fluxes can be dissolved in solvent, featuring very little smoke and very few splatters.
• Flux Content
  The flux content ranges from 1.2% to 3.5%. For the vast majority of applications, the flux content is recommended to range from 1.8% to 2.0%. The wire diameter is optional, including 0.35, 0.4, 0.5, 0.6, 0.8, 1.0, 1.2, and 1.6mm.

Additional Information:

• Item Code: 5050
• Production Capacity: 2000
• Delivery Time: 3
• Packaging Details: reel